RD7-ATX Adapter for RD7-CA Cooling After..

RD7-CA Cooling After, known as the car's turbo timer was released on September. The device was originally designed for use of motherboards with WOL (Wake On LAN) connector.  Due to the increasing demand in the market and for the recent high-end motherboards without WOL, we provided an optional cable adapter, RD7-ATX, so that RD7-CA can be used for all system, even without WOL connector.

RD7-ATX  supplies power for RD7-CA, it is simple to install without any connection error possibilities. It is use to supply power for RD7-CA Cooling After and not as a replacement of WOL connector for other device on any purposes.

Below is a guide on how to use RD7-ATX　

	RD7-ATX measures 10cm length including connectors. The attached WOL connector measures 40cm 　 　 　 　 　 *For motherboards with WOL connector, RD7-ATX is not necessary or can serve as an option for RD7-CA power source.
	Unplug the ATX power connector from the motherboard ATX connector.
	Connect the ATX power connector to RD7-ATX, male to female.
	Plug the RD7-ATX to the motherboard's ATX connector, male to female.
	Connect the attached WOL cable to the RD7-CA unit "WOL IN" 　 　 * Connecting the WOL cable to the motherboard WOL connector or LAN card will not result any damages, but definitely RD7-CA will not function without power connection.